上海淞江减震器集团有限公司介绍：JS-2-1000-M压缩机组弹簧隔振器产品信息，这里说下JS-2-100-M弹簧隔振器参数：荷载范围850-1000kgs，弹性系数34或21.25，适用挠度25mm。淞江集团为车间散热水塔推荐*款弹簧减震器，充分利用综合钢弹簧的低频和橡胶减振的阻尼.性，可消除高频传，达到明显的减振降噪效果，又能解决机械设备重心不均的减振难点。

压缩机组弹簧隔振器是采用多重组合弹簧为主体，上下配置钢板及橡胶垫组成。该产品充分利用综合钢弹簧的低频和橡胶减振的阻尼.性，可消除高频传，达到明显的减振降噪效果，又能解决机械设备重心不均的减振难点。本产品为敞开式结构，安装时可直接放在设备下，调节好重心，然后通过固定孔连接上下端面，也可直接的安置在减振座分支承结构之间。适用风机，水泵，空调机组等机械设备的减振。

The product information of js-2-1000-m compressor spring isolator is introduced by Shanghai Songjiang shock absorber Group Co., Ltd. the parameters of js-2-100-m spring isolator are as follows: load range 850-1000kgs, elastic coefficient 34 or 21.25, applicable deflection 25mm. Songjiang group recommends * type spring shock absorber for workshop cooling tower, which makes full use of the low frequency of steel spring and the damping of rubber shock absorber. It can eliminate high frequency transmission, achieve obvious effect of vibration and noise reduction, and solve the vibration reduction difficulty of uneven center of gravity of mechanical equipment.

 

The spring vibration isolator of compressor unit is composed of multiple combined springs, steel plates and rubber pads. The product makes full use of the low frequency of the steel spring and the damping of the rubber damping. It can eliminate the high frequency transmission, achieve the obvious effect of vibration and noise reduction, and solve the vibration reduction difficulty of the uneven center of gravity of the mechanical equipment. This product is an open structure, which can be directly placed under the equipment during installation, adjust the center of gravity, and then connect the upper and lower end faces through the fixed hole, or directly placed between the sub support structures of the damping seat. Suitable for vibration reduction of fans, pumps, air conditioning units and other mechanical equipment.